PL EN
PRACA ORYGINALNA
Vehicle wheel positioning innovation on a machine for measuring the contact parameters between a tyre and the road
 
 
 
Więcej
Ukryj
1
Educational and Research Centre in Transport, University of Pardubice, Czech Republic
 
 
Data nadesłania: 02-04-2023
 
 
Data ostatniej rewizji: 19-05-2023
 
 
Data akceptacji: 22-05-2023
 
 
Data publikacji: 30-06-2023
 
 
Autor do korespondencji
Petr Jilek   

Educational and Research Centre in Transport, University of Pardubice, Studentská 95, 53210, Pardubice, Czech Republic
 
 
The Archives of Automotive Engineering – Archiwum Motoryzacji 2023;100(2):31-43
 
SŁOWA KLUCZOWE
DZIEDZINY
STRESZCZENIE
This article deals with the development and proposal to increase the application of equipment for measuring the adhesion force between the road and the road vehicle. The device enabling the adhesion force measurement of a rotating vehicle wheel is called a dynamic adhesor. The actual position of the vehicle wheel relative to the road-simulating cylinder is, in the present embodiment of the dynamic adhesor, by means of a bolted clamping joint and stops. This embodiment has limiting applications. the test must be aborted, if the position of the vehicle wheel relative to the rotating cylinder changes. Therefore, the adhesor has been upgraded. The upgrade consists of adding a hydraulic control to allow repositioning of the vehicle wheel online without interrupting the experiment, from a workstation outside the rotating parts area. Input load values were determined from the adherent desired operating parameters and from the load simulation in the MSC Adams software. Hydraulic cylinders were designed in accordance with the results of the maximum operating loads and installation space. The current construction was adapted and supplemented with new parts for the use of these hydraulic cylinders. The article only deals with the area of new key elements. The equipment's use has been expanded by improving the dynamic adhesor, for example, with the possibility of simulating the vehicle wheel's driving behaviour when the vehicle is propped up, and in this way, the equipment can also be used for any required research in regard to noise emitted from the tyre's road contact. As a result of innovation, the use of the unique tyre-testing equipment has been expanded, increasing the safety and environmental friendliness of road vehicles.
 
REFERENCJE (20)
1.
Brukalski M., Wąsiewski A., Reński A.: Analysis of the influence of adhesion on limit forces transferred between wheels and road. The Archives of Automotive Engineering – Archiwum Motoryzacji. 2018, 80(2), 5–18, DOI: 10.14669/AM.VOL80.ART1.
 
2.
Dytrych V.: Stanovení metodiky pro měření na statickém a dynamickém adhezoru. University of Pardubice. 2019.
 
3.
Du Y., Liu C., Song Y., Li Y., Shen Y.: Rapid estimation of road friction for anti–skid autonomous driving. IEEE transactions on intelligent transportation systems. 2019, 21(6), 2461–2470, DOI: 10.1109/TITS.2019.2918567.
 
4.
Huang X., Jiang Y., Zheng B., Zhao R.: Theory and methodology on safety braking of autonomous vehicles based on the friction characteristic of road surface. Chinese Science Bulletin. 2020, 65(30), 3328–3340, DOI: 10.1360/TB-2020-0029.
 
5.
Che Y., Xiao W., Chen L., Huang Z.: GA-BP Neural Network Based Tire Noise Prediction. Advanced Materials Research. 2012, 443–444, 65–70, DOI: 10.4028/WWW.SCIENTIFIC.NET/AMR.443-444.65.
 
6.
Cheli F., Braghin F., Brusarosco M., Mancosu F., Sabbioni E.: Design and testing of an innovative measurement device for tyre–road contact forces. Mechanical Systems and Signal Processing. 2011, 25(6), 1956–1972, DOI: 10.1016/j.ymssp.2011.02.021.
 
7.
Kouhi Y., Guma S., Bajcinca N.: Real-time allocation of tire adhesion forces for electric vehicles. 2012 IEEE International Conference on Control Applications. 2012, 172–177, DOI: 10.1109/CCA.2012.6402723.
 
8.
Krmela J., Krmelová V.: The material parameters for computational modeling of long-fibre composites with textile. MATEC Web of Conferences. 2018, 157, 01011, DOI: 10.1051/matecconf/201815701011.
 
9.
Nandish H.S., Prajwal P., Patil S.S.: Estimation of Tire Scaling Coefficients and Simulation of On-Road Vehicle Behaviour. Lecture Notes in Mechanical Engineering. 2022, 295–314, DOI: 10.1007/978-981-19-2091-2_23.
 
10.
Novikov I., Lazarev D., Experimental installation for calculation of road adhesion coefficient of locked car wheel. Transportation Research Procedia. 2017, 20, 463–467, DOI: 10.1016/j.trpro.2017.01.075.
 
11.
Podkowski K. A., Małczuk A., Stasiak A., Pawlak M.: Testing of the torsional stiffness of the passenger car frame and its validation by means of finite element analysis. The Archives of Automotive Engineering – Archiwum Motoryzacji. 2019, 85(3), 83–101, DOI: 10.14669/AM.VOL85.ART6.
 
12.
Popov A.A., Cole D.J., Winkler C.B., Cebon D.: Laboratory measurement of rolling resistance in truck tyres under dynamic vertical load. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. 2003, 217(12), 1071–1079, DOI: 10.1243/09544070360729419.
 
13.
Rievaj V., Vrábel J., Synák F., Bartuška L.: The Effects of Vehicle Load on Driving Characteristics. Advances in Science and Technology. Research Journal. 2018, 12(1), 142–149, DOI: 10.12913/22998624/80896.
 
14.
Soukup J., Krmela J., Krmelová V., Skočilasová B., Artyukhov A.: FEM Model of Structure for Weightlifting in CrossFit in Terms of Material Parameters. Manufacturing technology. 2019, 19(2), 321–326, DOI: 10.21062/ujep/290.2019/a/1213-2489/MT/19/2/321.
 
15.
Stokłosa, J., Bartnik M.: Influence of tire pressure on the vehicle braking distance. The Archives of Automotive Engineering – Archiwum Motoryzacji. 2022, 97(3), 60–73, DOI: 10.14669/AM/155136.
 
16.
Tarkowski S., Nieoczym A., Caban J., Jilek P., Sejkorová M.: The Analysis of Pneumatic Wheel Rim Deformation While Hitting an Obstacle. Applied Sciences. 2022, 12(13), 6371, DOI: 10.3390/APP12136371.
 
17.
Verner J., Sejkorová M., Veselík P.: Volatile organic compounds in motor vehicle interiors under various conditions and their effect on human health. Scientific Journal of Silesian University of Technology. Series Transport. 2020, 107, 205–216, DOI: 10.20858/sjsutst.2020.107.16.
 
18.
Wang Y., Hu J., Wang F., Dong H., Yan Y., Ren Y., et al.: Tire Road Friction Coefficient Estimation. Review and Research Perspectives. Chinese Journal of Mechanical Engineering. 2022, 35(1), DOI:10.1186/s10033-021-00675-z.
 
19.
Wolf S., Teitge J., Mielke J., Schütze F., Jaeger C.: The European Green Deal — more than climate neutrality. Intereconomics. 2021, 56(2), 99–107, DOI: 10.1007/s10272-021-0963-z.
 
20.
Zahran E.S.M.M., Tan S.J., Tan E.H.A., Mohamad’Asri Putra N.A.A.B., Yap Y.H., Abdul Rahman E.K.: Spatial analysis of road traffic accident hotspots: evaluation and validation of recent approaches using road safety audit. Journal of Transportation Safety & Security. 2021, 13(6), 575–604, DOI: 10.1080/19439962.2019.1658673.
 
Deklaracja dostępności
 
eISSN:2084-476X
Journals System - logo
Scroll to top